Originally posted by LdMorgan
View Post
Here is a method I use for a chicken tractor that I think would work well for bunnies, too. The advantage of it is 1) zero carpentry, 2) very fast assembly, 3) very easy to move.
A 4X8 tractor has 32 sq. ft of protected space. A 10' diameter circle cage has 78.5 sq ft, so you can either populate it 2X or move it half as often. So here's how to make a really good circle cage:
Lay 40 feet of 4ft horse wire--that's the kind with the rectangular wire pattern--flat on the ground.
Using scrap tent poles from old dome tents, assemble two 41' "super" tent poles
Tying at about 2' intervals, attach the super poles to the top and bottom edges of the fence wire.
Attach 40' of 24" chicken wire to the lower portion of the fence wire.
Stand the assembly up on edge, and bend it into a 10' circle. The chicken wire should be on the outside, and the super poles should be on the inside of the fence edges.
Tie the fence ends together, and cut a door in the fence wall opposite the join. Do not cut the lowermost strand of fence wire.
Make a top for the cage out of old bed sheets. Get those from auctions, yard sales, thrift stores--anyplace cheap. You can hem them together, or pin them together at 2' intervals with a twist of scrap wire. (I find pinning easier.) Do not use a tarp: the top must not collect rainwater. It's just for shade and to keep hawks out. And flying chickens in.
The top will only be good for a year or two, but it's so cheap and easy to make that it doesn't really matter.
Let some sheet hang down on one side to make a better late afternoon sun shade.
Being spring-loaded and circular, the wire cylinder will be really sturdy.
Attach it to the ground with about a dozen 12" pegs--j-pins made from 1/4" wire work well. I cut mine from abandoned shopping carts. That way they are already bent, chrome plated, and free.
To move the pen, just pull the pegs. Then two people can pick it up one-handed and just walk away with it. VERY easily.
I tie the pegs to the pen frame with macrame cord so all you have to do is pull the cords to pull out the pegs, and then the pegs will travel with the pen--all ready to just restart and stomp iback into the ground.
With this pen, the lower super tent pole is optional. You can also put in a horse wire floor to keep bunnies from digging out and it will still be very easy to move.
A 4X8 tractor has 32 sq. ft of protected space. A 10' diameter circle cage has 78.5 sq ft, so you can either populate it 2X or move it half as often. So here's how to make a really good circle cage:
Lay 40 feet of 4ft horse wire--that's the kind with the rectangular wire pattern--flat on the ground.
Using scrap tent poles from old dome tents, assemble two 41' "super" tent poles
Tying at about 2' intervals, attach the super poles to the top and bottom edges of the fence wire.
Attach 40' of 24" chicken wire to the lower portion of the fence wire.
Stand the assembly up on edge, and bend it into a 10' circle. The chicken wire should be on the outside, and the super poles should be on the inside of the fence edges.
Tie the fence ends together, and cut a door in the fence wall opposite the join. Do not cut the lowermost strand of fence wire.
Make a top for the cage out of old bed sheets. Get those from auctions, yard sales, thrift stores--anyplace cheap. You can hem them together, or pin them together at 2' intervals with a twist of scrap wire. (I find pinning easier.) Do not use a tarp: the top must not collect rainwater. It's just for shade and to keep hawks out. And flying chickens in.
The top will only be good for a year or two, but it's so cheap and easy to make that it doesn't really matter.
Let some sheet hang down on one side to make a better late afternoon sun shade.
Being spring-loaded and circular, the wire cylinder will be really sturdy.
Attach it to the ground with about a dozen 12" pegs--j-pins made from 1/4" wire work well. I cut mine from abandoned shopping carts. That way they are already bent, chrome plated, and free.
To move the pen, just pull the pegs. Then two people can pick it up one-handed and just walk away with it. VERY easily.
I tie the pegs to the pen frame with macrame cord so all you have to do is pull the cords to pull out the pegs, and then the pegs will travel with the pen--all ready to just restart and stomp iback into the ground.
With this pen, the lower super tent pole is optional. You can also put in a horse wire floor to keep bunnies from digging out and it will still be very easy to move.
Some pics would be great!!
Comment