we have an old runabout boat.
last used 4 years ago..
inboard/outboard 305
we moved, life got busy, etc...
we've been using PRI G consistently for many years.
--
a mechanic buddy that owed me a favor agreed to come help/supervise the
clean up of tank and fuel lines and carb.
we started by removing gas from tank. he commented that he was surprised that the gas looked pretty good.
the fuel lines weren't clogged... the fuel filter wasn't gummed up... we put filter back on.
added 5 gallons of new gas.. (we didn't get all the old gas out... we suspect we had about 3 -4 quarts left.
a little gas in the carb and boat cranked... I've now run the boat about 45 miles..
mechanic was surprised that carb wasn't gummed up...
the only thing I can think of is that the PRI G did it's job...
I'm wondering if it would have cranked! we didn't even try.
I'm glad we didn't...
the old gas sure worked good burning huge debris piles!
bottom line..
high recommendation for PRI_G
I'm not a mechanic... but I could have done this without having mechanic supervising if we were in the paw!
(I'm going to change fuel filter!)
last used 4 years ago..
inboard/outboard 305
we moved, life got busy, etc...
we've been using PRI G consistently for many years.
--
a mechanic buddy that owed me a favor agreed to come help/supervise the
clean up of tank and fuel lines and carb.
we started by removing gas from tank. he commented that he was surprised that the gas looked pretty good.
the fuel lines weren't clogged... the fuel filter wasn't gummed up... we put filter back on.
added 5 gallons of new gas.. (we didn't get all the old gas out... we suspect we had about 3 -4 quarts left.
a little gas in the carb and boat cranked... I've now run the boat about 45 miles..
mechanic was surprised that carb wasn't gummed up...
the only thing I can think of is that the PRI G did it's job...
I'm wondering if it would have cranked! we didn't even try.
I'm glad we didn't...
the old gas sure worked good burning huge debris piles!
bottom line..
high recommendation for PRI_G
I'm not a mechanic... but I could have done this without having mechanic supervising if we were in the paw!
(I'm going to change fuel filter!)
Comment