I will be adding this to my preps!

[Guest]

All the guess work is done, no building, and no trial and error, when I need it. This is so far the best I've found, and it's cheap enough. Let me know what you guys think. http://woodgas-stove.com/

[Matt In Oklahoma]

Interesting, a turbo charger, which model were you looking at?

[runtothehills]

Just the $52 model.............just to have something, just in case. But we do alot of camping, so it might come in handy.

[runtothehills]

I just wonder how long that little motor will last under all that heat.

[Matt In Oklahoma]

I just wonder how long that little motor will last under all that heat.

That would be something for you to let us know!!! I would like to see more on it

[WiseOwl]

I was wondering the same thing about the motor/fan.....but that small version looks like it would work perfectly...I currently have a MSR whisperlite and its is great but if I run out of fuel I am out of a stove...this may get bought by me in the near future if I can find some good reviews

[610Alpha]

Sounds like it uses the same burning principle as the high efficiency fireplaces use. This is basically a non-catalytic wood burner. In that the combustion chamber has to reach about 1100 degrees F to get the second burn on the unburnt gases. Very little ash is leftover and hardly any creosote escapes thru the chimney which means very low risk of chimney fire. Non-catalytic fireplaces are required to produce less than 7.5 grams per hour of particulate and catalytic less than 4.1 grams per hour. Catalytic fireplaces use a catalytic converter that does the secondary burn but at a much lower temp around 550 degrees F.

https://www.blazeking.com/EN/wood-brochure.html Uncle in Law got one and he had to put it out made his basement too hot...lol. I think he didn't have proper air circulation. Some of these can easily heat a 3000 sq. ft home. Most can have burn times of 12+ hours without having to put wood in it but initially. They usually have a blower on them that helps push out the heated air.

[610Alpha]

Catalytic vs. Non Catalytic

Catalytic wood stoves and fireplace inserts have ceramic honeycombed chambers coated with a metal catalyst (usually platinum or palladium) that works to increase the rate of combustion. The catalytic combustor burns away gases and particulates (smoke) that would normally be emitted into the air. Catalytic wood stoves allow a longer, lower temperature, more controlled burn. Maintenance involves a gentle brushing of the face of the combustor, but never clean the internal honeycombed chamber. It should simply be replaced after about 2-3 years of normal use. Watch for creosote build-up and excessive smoke coming out of the chimney to alert you for replacement.


With Non-Catalytic (recirculating) wood stoves, combustion occurs in the heavily insulated firebox. These stoves are generally less expensive than catalytic wood stoves and require less maintenance. For instance, Earth Stove makes a 28" Freestanding Wood Burning unit that uses the HT (high-tech) system relying on high firebox temperatures and metered oxygen flow to get the maximum fuel value from each piece of wood. Smoke is literally burned by the heat of the fire itself - within the woodstove's carefully engineered environment. The non-catalytic models are simple to operate and provide the beautiful, dramatic flames that serious fire watchers demand. While these require a bit more tending, for some people that's half the fun!


Before installation of these systems, we recommend you consult your local building official. If you use an approved protected wall system, some US building codes allow for reduced wall clearances.
Non-Catalytic System

1. The primary air control draws air into a preheating system to promote fast, clean startups and to facilitate clean combustion. (This preheated air draws downward across the glass to keep the window clean for clear viewing).
2. Some models use supplemental startup air.
3. Primary combustion takes place within the fuel load.
4. Above the primary fire, preheated air draws through a series of metered holes under the baffle to complete the combustion of unburned gases.
5. All non-catalytic units, like their catalytic cousins, give you a certified "smoke-free" burn and more heat for your home.

Catalytic System

1. As air enters the unit through the draft control, it's preheated to assure effective combustion.
2. A full-tunnel baffle forces smoke back through the fire to promote secondary combustion.
3. Air enters through a metered system that provides oxygen to help the catalytic combustor complete its job.
4. Finally, the flow restrictor slows gasses and houses a catalytic combustor to assure a certified clean burn.

http://www.fireplacesnow.com/WoodStoves.htm

[runtothehills]

Back to this stove. I bought one, got it yesterday and it's a peice of junk! The stove it's self looks well built, but it didn't work. The battery box looks like it cost them 2 cent to build and has soon a I plugged it in to check it, I pulled it out and the plastic o-ring on the connector came off and stuck it the unit. I emailed the company and asked the guy how can you rely on this in a emergency situations. All he said was sorry, and offered a refund. They would have a great product, if the spent more money on the electronics. There is a guy on ebay that builds a wood-gas stove. I'm going to give him a shot. Check this link........... http://cgi.ebay.com/SURVIVAL-CAMPING...item2c558d670d

[Matt In Oklahoma]

Back to this stove. I bought one, got it yesterday and it's a peice of junk! The stove it's self looks well built, but it didn't work. The battery box looks like it cost them 2 cent to build and has soon a I plugged it in to check it, I pulled it out and the plastic o-ring on the connector came off and stuck it the unit. I emailed the company and asked the guy how can you rely on this in a emergency situations. All he said was sorry, and offered a refund. They would have a great product, if the spent more money on the electronics. There is a guy on ebay that builds a wood-gas stove. I'm going to give him a shot. Check this link........... http://cgi.ebay.com/SURVIVAL-CAMPING...item2c558d670d

Thanks for the real review!!

[runtothehills]

Thanks for the real review!!

Your welcome! I'm a bit disappointed, Oh well! Off to the next review. I'm going to get the one on ebay and give it a shot.

[610Alpha]

hope it works out better for you!!

[qrprat77]

Back to this stove. I bought one, got it yesterday and it's a peice of junk! The stove it's self looks well built, but it didn't work. The battery box looks like it cost them 2 cent to build and has soon a I plugged it in to check it, I pulled it out and the plastic o-ring on the connector came off and stuck it the unit. I emailed the company and asked the guy how can you rely on this in a emergency situations. All he said was sorry, and offered a refund. They would have a great product, if the spent more money on the electronics. There is a guy on ebay that builds a wood-gas stove. I'm going to give him a shot. Check this link........... http://cgi.ebay.com/SURVIVAL-CAMPING...item2c558d670d

Will you be keeping the crappy one? if so, can we have an account of the innards... I might be able to rig something up. Seems like the Ebay stove is electric free, and does the same thing

I like the price better too!
Makes me wish I was home to order one.